Salta al contenuto principale

Introduzione

In order to replace the speaker, you will need to use solder device.

Ricambi

Nessuna parte specificata.

  1. Position the device so the bottom panel is facing up.
    • Position the device so the bottom panel is facing up.

  2. Unscrew the each of the 4 mm screws pictured. Unscrew the each of the 4 mm screws pictured.
    • Unscrew the each of the 4 mm screws pictured.

  3. Use a soldering device to break the connections pictured and remove the wires. Use a soldering device to break the connections pictured and remove the wires.
    • Use a soldering device to break the connections pictured and remove the wires.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Amin

Membro da: 13/02/2016

621 Reputazione

5 Guide realizzate

Team

IUPUI, Team 1-1, Wilson Spring 2016 Membro di IUPUI, Team 1-1, Wilson Spring 2016

IUPUI-WILSON-S16S1G1

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 10

Tutti i Tempi: 562