Salta al contenuto principale

Kid Galaxy Morphibians Explorer Axle Replacement

Cosa ti serve

  1. Kid Galaxy Morphibians Explorer Axle Replacement, Axle: passo 1, immagine 1 di 1
    • Remove both 8.0 mm Phillips #1 screws, one for each wheel.

  2. Kid Galaxy Morphibians Explorer Axle Replacement: passo 2, immagine 1 di 1
    • Remove the wheels by pulling them away from the RC car.

  3. Kid Galaxy Morphibians Explorer Axle Replacement: passo 3, immagine 1 di 1
    • Make note of where each driving gear cover is placed. They only go in one way.

    • Remove the eight 8.0mm Phillips #00 screws, two screws for each wheel.

  4. Kid Galaxy Morphibians Explorer Axle Replacement: passo 4, immagine 1 di 1
    • Pry open the two gear covers on both sides.

  5. Kid Galaxy Morphibians Explorer Axle Replacement: passo 5, immagine 1 di 1
    • Pull the driving gears off the axles by sliding them off the axles and exposing both axles.

  6. Kid Galaxy Morphibians Explorer Axle Replacement: passo 6, immagine 1 di 1
    • Slide both axles from the internal axles guides within the car.

    • Reverse the steps to replace the axles.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 1-2, Hickman Fall 2014 Membro di USF Tampa, Team 1-2, Hickman Fall 2014

USFT-HICKMAN-F14S1G2

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 269