Introduzione

A guide on how to replace the bass remote in the Kicker CXA300.1

  1. Remove the five T10 Torx screws on silver plate. Remove the five T10 Torx screws on silver plate.
    • Remove the five T10 Torx screws on silver plate.

  2. Remove the two T10 Torx screws from the faceplate.
    • Remove the two T10 Torx screws from the faceplate.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Remove the six T10 Torx screws from the bottom. Remove bottom panel.
    • Remove the six T10 Torx screws from the bottom.

    • Remove bottom panel.

  5. Desolder the remote receiver from the motherboard.
    • Desolder the remote receiver from the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tim Keptya

Membro da: 12/04/2018

519 Reputazione

4 Guide realizzate

Team

UW Tacoma, Team S1-G3, Liner Spring 2018 Membro di UW Tacoma, Team S1-G3, Liner Spring 2018

UWT-LINER-S18S1G3

3 Membri

4 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 66