Salta al contenuto principale

Keurig K40 Top Water Pump Replacement

Cosa ti serve

  1. Keurig K40 Top Water Pump Replacement, Top Water Pump: passo 1, immagine 1 di 1
    • Begin by removing the top cover from the device.

    • Remove the cover by gently rocking it back and forth with an emphasis on lowering the left side underneath an internal peg.

  2. Keurig K40 Top Water Pump Replacement: passo 2, immagine 1 di 1
    • Unscrew both 1.5mm screws located on the water pump.

  3. Keurig K40 Top Water Pump Replacement: passo 3, immagine 1 di 2 Keurig K40 Top Water Pump Replacement: passo 3, immagine 2 di 2
    • Keeping one hand firmly placed on the device, tug upwards on the water pump until it is separated from the device.

    • The water pump and pipe should now be loose and easy to move as shown.

  4. Keurig K40 Top Water Pump Replacement: passo 4, immagine 1 di 2 Keurig K40 Top Water Pump Replacement: passo 4, immagine 2 di 2
    • Pull on the point where the pipe meets the water pump.

    • The pipe will come loose and the water filter will be free and ready to be replaced.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Team

USF Tampa, Team 6-1, Eyestone Spring 2016 Membro di USF Tampa, Team 6-1, Eyestone Spring 2016

USFT-EYESTONE-S16S6G1

3 Membri

5 Guide realizzate

4 Commenti

I NEED ONE OF THESE! Where can I find one????

G Steve - Replica

This is a check valve, not the water pump.

Rick Koen - Replica

Please rename this article. The item is not a water pump.

tvyse46 - Replica

I viewed this to replace the pump. But after the checkvalve was replaced through these instructions my K40 works like new. Thank you.

Glenn Stanley - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 19

Ultimi 30 Giorni: 52

Tutti i Tempi: 9,422