Salta al contenuto principale

Keurig B60 Handle Replacement

Cosa ti serve

  1. Keurig B60 Handle Replacement, Handle: passo 1, immagine 1 di 1
    • Lift the handle

  2. Keurig B60 Handle Replacement: passo 2, immagine 1 di 3 Keurig B60 Handle Replacement: passo 2, immagine 2 di 3 Keurig B60 Handle Replacement: passo 2, immagine 3 di 3
    • Locate and remove the two 9.5 mm Torx T15 screws on both sides of the handle.

  3. Keurig B60 Handle Replacement: passo 3, immagine 1 di 2 Keurig B60 Handle Replacement: passo 3, immagine 2 di 2
    • Remove the broken handle and replace with the new one

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Jake Wynn

Membro da: 04/11/16

830 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 1-7, Maness Spring 2016 Membro di Cal Poly, Team 1-7, Maness Spring 2016

CPSU-MANESS-S16S1G7

5 Membri

5 Guide realizzate

3 Commenti

The handle is locked up, partially ajar. Inserted a k-cup and handle locked when I was pulling it down

Meme Hill - Replica

Handle is locked in a partial open position. I raised handle, inserted-cup and when the handle

was pulled down it locked halfway down and does not move

Meme Hill - Replica

I also have a similar problem as Meme Hill, where the k cup area jostles and jams to an awkward position when moving the handle up (it cannot go up all the way), and it prevents full access to k cup, but I don't know why or what is preventing proper operation of handle swing. My current work around is keep on trying opening and closing, and eventually the handle can open all the way, and the k-cup area part swings out, but it really annoying. It should be accessible the first time when putting the handle up.

Lisa Munn - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 50

Tutti i Tempi: 2,718