Aggiusta la tua roba Comunità Store

Kenwood DNX571HD CD/DVD Drive Replacement

Introduzione

If the CD/DVD drive in your Kenwood DNX571HD car stereo has stopped working, or has physically broken, follow this guide to remove the module and replace it with a new one.

Cosa ti serve

  1. Kenwood DNX571HD CD/DVD Drive Replacement, CD/DVD Drive: passo 1, immagine 1 di 2 Kenwood DNX571HD CD/DVD Drive Replacement, CD/DVD Drive: passo 1, immagine 2 di 2

    • Unscrew the four 3.5mm side screws with a Phillips #1 screwdriver.

    • There are two screws per side.

    Modifica

  2. Kenwood DNX571HD CD/DVD Drive Replacement: passo 2, immagine 1 di 3 Kenwood DNX571HD CD/DVD Drive Replacement: passo 2, immagine 2 di 3 Kenwood DNX571HD CD/DVD Drive Replacement: passo 2, immagine 3 di 3

    • Use a spudger to unhook the plastic clips on the sides and top of the front panel. There are two clips on each side and one clip on the top.

    • Place the spudger between the plastic tab and the metal case and gently lift the spudger away from the case.

    Modifica

  4. Kenwood DNX571HD CD/DVD Drive Replacement: passo 3, immagine 1 di 1

    • Pull the top of the front panel out and down to remove front panel.

    • Remove the front panel gently so as not to damage the ribbon cables behind it.

    Modifica

  5. Kenwood DNX571HD CD/DVD Drive Replacement: passo 4, immagine 1 di 3 Kenwood DNX571HD CD/DVD Drive Replacement: passo 4, immagine 2 di 3 Kenwood DNX571HD CD/DVD Drive Replacement: passo 4, immagine 3 di 3

    • Unscrew the three 5mm screws from the top of the device using a Phillips #1 screwdriver.

    • Lift up to remove the top casing.

    Modifica

  6. Kenwood DNX571HD CD/DVD Drive Replacement: passo 5, immagine 1 di 1

    • Lift the CD drive carefully to expose the attached cable underneath.

    Modifica

  7. Kenwood DNX571HD CD/DVD Drive Replacement: passo 6, immagine 1 di 2 Kenwood DNX571HD CD/DVD Drive Replacement: passo 6, immagine 2 di 2

    • Flip up the black clasp with a spudger to disconnect the large white ribbon cable connecting the CD drive to the board underneath.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 9

Tutti i Tempi: 1,065