Aggiusta la tua roba Comunità Store

Kenmore 110 Series Washing Machine Water Pump Replacement

Introduzione

Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.

Cosa ti serve

  1. Kenmore 110 Series Washing Machine Water Pump Replacement, Water Pump: passo 1, immagine 1 di 1

    • Unplug the washing machine!

    • Carefully lay washing machine on its back.

    Modifica

  3. Kenmore 110 Series Washing Machine Water Pump Replacement: passo 2, immagine 1 di 3 Kenmore 110 Series Washing Machine Water Pump Replacement: passo 2, immagine 2 di 3 Kenmore 110 Series Washing Machine Water Pump Replacement: passo 2, immagine 3 di 3

    • Carefully remove both wire harnesses connected to the pump.

    • Squeeze and pull back hose clamp.

    • Twist drain hose off of pump.

    • Using a 1/4" socket wrench, remove the three mounting screws.

    • Pull the pump out of place.

    • Pulling the pump away takes a little force.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 14 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Robert Trout

Membro da: 09/26/12

1.234 Reputazione

5 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

Cal Poly, Team 15-43, Forte Fall 2012 Membro di Cal Poly, Team 15-43, Forte Fall 2012

CPSU-FORTE-F12S15G43

5 Membri

11 Guide realizzate

9 Commenti

please provide info on how to test the water pump once it's removed...

Oscar Ramos - Replica

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas - Replica

My clothes are still really wet.

Tracy Schultz - Replica

Washer doesn't move doesn't do any thing it just hummus won't drain water

Hector Rios - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 13

Ultimi 7 Giorni: 93

Ultimi 30 Giorni: 352

Tutti i Tempi: 58,684