Introduzione

Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.

Strumenti

Parti

Nessuna parte richiesta.

Unplug the washing machine!
  • Unplug the washing machine!

  • Carefully lay washing machine on its back.

Aggiungi Commento

Carefully remove both wire harnesses connected to the pump.
  • Carefully remove both wire harnesses connected to the pump.

  • Squeeze and pull back hose clamp.

  • Twist drain hose off of pump.

  • Using a 1/4" socket wrench, remove the three mounting screws.

  • Pull the pump out of place.

  • Pulling the pump away takes a little force.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Robert Trout

Membro da: 26/09/2012

742 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 15-43, Forte Fall 2012 Membro di Cal Poly, Team 15-43, Forte Fall 2012

CPSU-FORTE-F12S15G43

5 Membri

5 Guide realizzate

i have a speed problem with my washer ...

http://tristaterepairs.com/dryer-repair....

Andre Matthew - Replica

please provide info on how to test the water pump once it's removed...

Oscar Ramos - Replica

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 15

Ultimi 7 Giorni: 96

Ultimi 30 Giorni: 464

Tutti i Tempi: 33,932