Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Kenmore 110 Series Washing Machine Water Level Sensor Replacement

Introduzione

Use this guide to replace a faulty water level sensor.

Cosa ti serve

  1. Kenmore 110 Series Washing Machine Water Level Sensor Replacement, Water Level Sensor: passo 1, immagine 1 di 1

    • Unplug the washing machine!

    • Using a 5/16" socket wrench or an adjustable wrench, remove the three screws from the top rear of the washer.

    • Lifting from the rear, remove the top panel.

    • The top panel will still be connected by wires and hoses. It will help if you have a flat raised surface to set the top panel on.

    Traduci

  3. Kenmore 110 Series Washing Machine Water Level Sensor Replacement: passo 2, immagine 1 di 3 Kenmore 110 Series Washing Machine Water Level Sensor Replacement: passo 2, immagine 2 di 3 Kenmore 110 Series Washing Machine Water Level Sensor Replacement: passo 2, immagine 3 di 3

    • Using a 5/16" socket wrench or a hand wrench, remove the two screws from the component cover.

    • From the bottom, pull out and remove the component cover.

    Traduci

  4. Kenmore 110 Series Washing Machine Water Level Sensor Replacement: passo 3, immagine 1 di 3 Kenmore 110 Series Washing Machine Water Level Sensor Replacement: passo 3, immagine 2 di 3 Kenmore 110 Series Washing Machine Water Level Sensor Replacement: passo 3, immagine 3 di 3

    • Remove wires from water level sensor.

    • With a Phillips screwdriver remove the mounting screw.

    • Cut the zip tie and remove water level hose.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Robert Trout

Membro da: 09/26/12

1.234 Reputazione

5 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

Cal Poly, Team 15-43, Forte Fall 2012 Membro di Cal Poly, Team 15-43, Forte Fall 2012

CPSU-FORTE-F12S15G43

5 Membri

11 Guide realizzate

4 Commenti

how to test water level switch??

countryrhoads4x4 - Replica

how to test water level switch?

countryrhoads4x4 - Replica

What is the water sensor part # for a Kenmore model #11029842990?

Who has that part 4the best price?

Rod Brannon - Replica

Hi,

I replaced the water-level pressure switch with a new kit but it did not resolve my problem. After installing the switch and line, I selected the lowest level but the tub continued to fill beyond the smallest wash level. I have a Kenmore Model # 110.20902. What other part or solution could resolve my issue?

BTW: I read replacing the water inlet valve night be involved but I already did that within the last six months and everything worked fine until I noticed the water level had changed the last two washes to a large load only. In fact, the water looked above the large level during my last wash.

I would appreciate any insight.

Shannon

Shannon - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 38

Ultimi 30 Giorni: 170

Tutti i Tempi: 39,837