Aggiusta la tua roba ComunitĂ  Store

Katadyne Hiker Water Filter Cleaning

Introduzione

Has your Katadyne Hiker water filter become unable to pump or exceptionally hard to do so? Use this guide to regain functionality and ease of use.

Cosa ti serve

  1. Katadyne Hiker Water Filter Cleaning, Katadyne Hiker Water Filter Cleaning: passo 1, immagine 1 di 1

    • Remove the "snap fit" guard by pulling directly away from the filter body.

    Modifica

  2. Katadyne Hiker Water Filter Cleaning: passo 2, immagine 1 di 1

    • Remove the pump handle by pulling it completely out of the shaft.

    Modifica

  3. Katadyne Hiker Water Filter Cleaning: passo 3, immagine 1 di 3 Katadyne Hiker Water Filter Cleaning: passo 3, immagine 2 di 3 Katadyne Hiker Water Filter Cleaning: passo 3, immagine 3 di 3

    • Use the pump handle to remove the filter cap.

    • Place the horizontal groove of the pump handle depicted in image 1 onto the filter fins.

    • Press the pump handle firmly against the fins and turn the filter counter clockwise.

    • Once unscrewed, remove the filter completely from the body.

    Modifica

  5. Katadyne Hiker Water Filter Cleaning: passo 4, immagine 1 di 3 Katadyne Hiker Water Filter Cleaning: passo 4, immagine 2 di 3 Katadyne Hiker Water Filter Cleaning: passo 4, immagine 3 di 3

    • Only perform this step if solid particles are evident on the outside of the filter.

    • Lightly brush the entire filter with a soft bristled toothbrush under running water.

    Modifica

  6. Katadyne Hiker Water Filter Cleaning: passo 5, immagine 1 di 1

    • Replace the filter inside the filter body and screw clockwise until tight.

    Modifica

  7. Katadyne Hiker Water Filter Cleaning: passo 6, immagine 1 di 1

    • Lubricate the pump handle O-ring extensively with the Katadyne lubricant (sold with pump).

    Modifica

  8. Katadyne Hiker Water Filter Cleaning: passo 7, immagine 1 di 1

    • Replace the pump handle inside the pump handle shaft.

    Modifica

  9. Katadyne Hiker Water Filter Cleaning: passo 8, immagine 1 di 2 Katadyne Hiker Water Filter Cleaning: passo 8, immagine 2 di 2

    • Replace the "snap-fit" guard by pushing directly toward the filter body.

    Modifica
Conclusione

If difficulty pumping persists, a new filter is required.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Dylan Carey

Membro da: 02/24/15

130 Reputazione

1 Guida realizzata

Distintivi: 4

+ 1 altro distintivo

Team

Cal Poly, Team 24-6, Green Winter 2015 Membro di Cal Poly, Team 24-6, Green Winter 2015

CPSU-GREEN-W15S24G6

4 Membri

15 Guide realizzate

Un commento

wow. this is very helpful post.

thanks for nice guide line..

plz cheak out this—https://waterfilterhub.com

Kenny J. Jackson - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 18

Tutti i Tempi: 693