Aggiusta la tua roba Comunità Store

KYVOL CYBOVAC E20 Front Bumper Replacement

Introduzione

The Kyvol Cybovac E20 contains a front bumper with sensors to prevent the vacuum from hitting walls or furniture. This bumper can become obstructed by debris, so try cleaning it before anything else. If the problem persists, use this guide to replace the broken front bumper.

Cosa ti serve

  1. KYVOL CYBOVAC E20 Front Bumper Replacement, Front Bumper: passo 1, immagine 1 di 1

    • Start with the vacuum on a flat surface.

    • The power button should be on the side closest to you.

    Modifica

  3. KYVOL CYBOVAC E20 Front Bumper Replacement: passo 2, immagine 1 di 2 KYVOL CYBOVAC E20 Front Bumper Replacement: passo 2, immagine 2 di 2

    • Flip the vacuum over so the bottom is facing up.

    • The dust bin should be on the side furthest from you.

    • Remove the eight 1 mm screws holding the bumper in place using a Phillips #00 screwdriver.

    Modifica

  4. KYVOL CYBOVAC E20 Front Bumper Replacement: passo 3, immagine 1 di 2 KYVOL CYBOVAC E20 Front Bumper Replacement: passo 3, immagine 2 di 2

    • Remove both sides of the bumper and replace with new ones.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 12

Tutti i Tempi: 225