KATCHY Insect Trap Disassembly and Clean

Introduzione

When exposed to excessive dust and lint, the air vent and fan can be clogged by lint build-up. Where they become unusable because the bugs can't pass through the holes and the fan slows down. This guide will show people how to restore their Trap to be fully functional and allow the airflow to be dragged to the sticky trap.

Cosa ti serve

Passo 1 KATCHY Insect Trap Disassembly and Clean

KATCHY Insect Trap Disassembly and Clean, KATCHY Insect Trap Disassembly and Clean: passo 1, immagine 1 di 2

KATCHY Insect Trap Disassembly and Clean, KATCHY Insect Trap Disassembly and Clean: passo 1, immagine 2 di 2

Unplug the Power plug from the device.

Traduci

Passo 2

Open the tray lid to then remove the used insect trap.

Traduci

Passo 3

Flip the device upside down and leave the tray lid open.

Traduci

Passo 4

This step removes the mesh from the base.

Traduci

Passo 5

This will unlock the vent and UV light bar.

Traduci

Passo 6

Optional: Push the circuit cover case away from the clip to unclip and clean.

Traduci

Passo 7

Flip the device so that it is no longer upside down.
If the top cover is stuck, you can grab onto the base and push the cover out with your thumb.

Traduci

Passo 8

Be careful not to damage the wire connecting it to the base. They should be connected still.

Traduci

Passo 9

(Extra) Two screws are protecting the circuit board if you want to do something with it.

Traduci

Passo 10

Double-check that the fan has no dust to ensure the motor will run more efficiently with less dust.

Traduci

Passo 11

Retrace your steps by going in reverse order to reassemble each part.

Traduci

Conclusione

To reassemble your device, follow these instructions in reverse order. Plug the power supply into the device and check if everything works. The UV light should display like normal.