Salta al contenuto principale

Introduzione

Dripping water out of the joint between water reservoir and machine is an annoying issue. The water reservoir seal should be replaced. This ist a very easy fix, you even need not open the Impressa.

  1. Remove the water reservoir. Turn the Jura on its side to have access to the bottom plate The water connector is protected by a plastic cover, which is secured by two plastic rivets.
    • Remove the water reservoir.

    • Turn the Jura on its side to have access to the bottom plate

    • The water connector is protected by a plastic cover, which is secured by two plastic rivets.

    • Use pliers to squeeze the rivets and push them up.

    • Carefully pry up the plastic cover.

    • Give some food-proof lubricant to the new seal and replace it.

Conclusione

To reassemble your device, follow these steps in reverse order

Un ringraziamento speciale a questi traduttori:

de en

50%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

VauWeh

Membro da: 19/10/2015

136.698 Reputazione

177 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 9

Tutti i Tempi: 276