Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

The presser foot is one of the most important parts of the sewing machine. This guide shows you how to replace different presser feet on the Juki DDL-8700.

Parti

  1. Make sure to turn off the machine before replacing the presser foot.
    • Make sure to turn off the machine before replacing the presser foot.

    • Unthread the needle.

  2. Roll the hand wheel on the right side of the machine to raise the needle up. Roll the hand wheel on the right side of the machine to raise the needle up. Roll the hand wheel on the right side of the machine to raise the needle up.
    • Roll the hand wheel on the right side of the machine to raise the needle up.

  3. Pull up the switch to raise the presser foot. Pull up the switch to raise the presser foot.
    • Pull up the switch to raise the presser foot.

  4. Use a screwdriver to disassemble the presser foot. Use a screwdriver to disassemble the presser foot. Use a screwdriver to disassemble the presser foot.
    • Use a screwdriver to disassemble the presser foot.

  5. Use the screwdriver to assemble the new  presser foot. Use the screwdriver to assemble the new  presser foot. Use the screwdriver to assemble the new  presser foot.
    • Use the screwdriver to assemble the new presser foot.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Ada Lee

Membro da: 28/04/2017

119 Reputazione

1 Guida realizzata

Team

UC Davis, Team S3-G5, Coad Spring 2017 Membro di UC Davis, Team S3-G5, Coad Spring 2017

UCD-COAD-S17S3G5

3 Membri

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 37

Tutti i Tempi: 1,508