Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
You can really take this off however you want but here's a pic.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a spudger or similar pry the guard off one side at a time.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the screws for the speaker and the four that are down the holes.
-
It isn't necessary but I removed the d-ring as well.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the black button spacers. (Note: There are 3 spacers I lost one).
-
Push the white bottom through the hole and slowly wiggle the blue case off. Be careful not to break the speaker cables.
-
Now remove the four screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
They used black silicone to keep the connectors together so the entire assembly may come off. I suggest making sure you know how the go back together.
-
Carefully using a knife try to split the silicone so the connectors come off easily.
-
Next remove the fours screws holding the board in. (Note: There is two matching pairs.)
-
Using the spudger remove the battery from the white plastic.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Yay! It is disassembled.
-
(Note: There are 3 spacers I lost one).
-