Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Parti

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Before you begin, crank the window open an inch or two.
    • Before you begin, crank the window open an inch or two.

    • After the crank is removed, you won't be able to open the window for extra room to use your screwdriver in here.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    To get to the gearbox, you must remove a few parts.
    • To get to the gearbox, you must remove a few parts.

    • Remove the crank handle screw.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the crank handle by pulling it straight out.
    • Remove the crank handle by pulling it straight out.

    • Notice in the picture that the window frame is still in front of the gearbox. You will need to either remove that side of the frame or shift it out of the way.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Using a Phillips screwdriver, remove the two screws from the gearbox.
    • Using a Phillips screwdriver, remove the two screws from the gearbox.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Using a Phillips screwdriver, remove the two screws from the mount at the opposite end of the bar.
    • Using a Phillips screwdriver, remove the two screws from the mount at the opposite end of the bar.

  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Lift the bar up slightly so that it pivots and the gearbox will roll about 30 degrees back.
    • Lift the bar up slightly so that it pivots and the gearbox will roll about 30 degrees back.

    • This allows you to clear the lower window frame and pull the bar clear of it.

    • Angle the bar as you're bringing it forward so that the gearbox clears the frame first, then the mount side can be brought forward too.

  7. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Pry the gearbox from the end of the bar using a flat head screwdriver.
    • Pry the gearbox from the end of the bar using a flat head screwdriver.

    • If it seems stuck, work the screwdriver around the gap gently. You don't want to bend anything.

  8. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Place the new gearbox onto the end of the bar.  Be sure to line up the slots in the bar with the two ridges inside the sleeve of the gearbox.
    • Place the new gearbox onto the end of the bar. Be sure to line up the slots in the bar with the two ridges inside the sleeve of the gearbox.

    • You do not need to remove the mount on the other end unless it is broken and also needs to be replaced. Both of these parts need to be securely fastened to the window box for the window to work.

  9. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    With the new gearbox in place, angle the bar back into place with the mount end going in first. .
    • With the new gearbox in place, angle the bar back into place with the mount end going in first. .

    • Keep the bar slightly rotated so that the gearbox will clear the window frame.

    • The gearbox angle you see in the picture is important.

  10. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Swing the gearbox and the mount into their original positions, matching the screw holes is a good reference.
    • Swing the gearbox and the mount into their original positions, matching the screw holes is a good reference.

    • Reinstall the screws in the gearbox and mount.

  11. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    After you have screwed the gearbox and mount into place, test the gearbox with the crank to be sure it opens and closes.
    • After you have screwed the gearbox and mount into place, test the gearbox with the crank to be sure it opens and closes.

    • If everything functions well, put your frame and crank handle back on.

Linea Traguardo

Altre 3 persone hanno completato questa guida.

thank you , so simple and effective

tehillimsong - Replica

thank you so much for taking the time to share your knowledge and experience in this DIY project. I have several windows like this I need to fix.

Cecilia Andrus - Replica

Thanks for this. One of mine seems to have stripped out. Opens fully, but won’t pull the window fully closed. I’ll replace the gear box.

Mic - Replica

Where do you buy the gear boxes from?

dixietraders4 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 9

Ultimi 7 Giorni: 48

Ultimi 30 Giorni: 233

Tutti i Tempi: 3,515