Aggiusta le tue cose Community Store

Jabra Elite 85h Bluetooth Module Replacement

Introduzione

If you are having problems connecting to your Jabra Elite 85H headphones there could be a problem with the Bluetooth module. Follow this guide to correctly disassemble the headsets and repair the module. This guide takes you step by step on how to do it.

Cosa ti serve

  1. Jabra Elite 85h Bluetooth Module Replacement, Bluetooth Module: passo 1, immagine 1 di 3 Jabra Elite 85h Bluetooth Module Replacement, Bluetooth Module: passo 1, immagine 2 di 3 Jabra Elite 85h Bluetooth Module Replacement, Bluetooth Module: passo 1, immagine 3 di 3

    • Remove each ear cushion by hooking your fingers along the inside of the ear cushion and pulling up and away from the ear cup.

    • If the cushion does not fully release, move your hand to the opposite side and pull up inn the same manner.

    Modifica

  2. Jabra Elite 85h Bluetooth Module Replacement: passo 2, immagine 1 di 3 Jabra Elite 85h Bluetooth Module Replacement: passo 2, immagine 2 di 3 Jabra Elite 85h Bluetooth Module Replacement: passo 2, immagine 3 di 3

    • The foam inserts and backing tape are very delicate, take your time when removing them and be careful to not rip or tear the material.

    • Using the small plastic spudger to assist, begin lifting up and removing the foam inserts with attached backing tape.

    Modifica

  3. Jabra Elite 85h Bluetooth Module Replacement: passo 3, immagine 1 di 3 Jabra Elite 85h Bluetooth Module Replacement: passo 3, immagine 2 di 3 Jabra Elite 85h Bluetooth Module Replacement: passo 3, immagine 3 di 3

    • Repeat previous steps on other side.

    Modifica

  5. Jabra Elite 85h Bluetooth Module Replacement: passo 4, immagine 1 di 1

    • Unscrew and remove the four T6 screws holding the speaker in place.

    Modifica

  6. Jabra Elite 85h Bluetooth Module Replacement: passo 5, immagine 1 di 1

    • Tilt the headphones over so that the speaker tilts out of the plastic holder.

    • Repeat for both sides.

    Modifica

  7. Jabra Elite 85h Bluetooth Module Replacement: passo 6, immagine 1 di 2 Jabra Elite 85h Bluetooth Module Replacement: passo 6, immagine 2 di 2

    • Remove the two screws holding the upper and lower circuit boards in place.

    Modifica

  8. Jabra Elite 85h Bluetooth Module Replacement: passo 7, immagine 1 di 2 Jabra Elite 85h Bluetooth Module Replacement: passo 7, immagine 2 di 2

    • Remove the two attached circuit boards from the headphone housing.

    • De-solder Bluetooth Module from control board to replace.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Ryan Callaghan

Membro da: 03/13/23

962 Reputazione

4 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

UMass Dartmouth, Team 3-4, Petersen Spring 2023 Membro di UMass Dartmouth, Team 3-4, Petersen Spring 2023

UMASSD-PETERSEN-S23S3G4

4 Membri

12 Guide realizzate

2Commenti sulla guida

But where could one get this Bluetooth Module? Is it only available for Jabra workers?

sarita sulkakoski - Replica

Anyone can tell how I can get parts for this thing - need main module

Janusz Pokorski (Smartthing) - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 58

Tutti i Tempi: 2,294