Cosa ti serve
-
-
This can be done by prying at the base of the ear cup and moving around in a circle.
-
-
-
-
once the screws are loosened. Pry at the base of the driver to release the plastic tabs.
-
Loosen the three screws. Note the position of the wire feeding the driver.
-
-
-
There is a small amount of adhesive on the backside of the battery.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.