Aggiusta la tua roba Comunità Store

JBL Tune 510BT Faceplate Replacement

Cosa ti serve

  1. JBL Tune 510BT Faceplate Replacement, Faceplate: passo 1, immagine 1 di 2 JBL Tune 510BT Faceplate Replacement, Faceplate: passo 1, immagine 2 di 2

    • Firmly grasp the earmuff and pull away from the center until the lip of the earmuff is disengaged.

    • Pull the earmuff towards the center of the headphones until it is free.

    Modifica

  3. JBL Tune 510BT Faceplate Replacement: passo 2, immagine 1 di 2 JBL Tune 510BT Faceplate Replacement: passo 2, immagine 2 di 2

    • Remove the three 3 mm screws using a JIS #00 screwdriver.

    Modifica

  4. JBL Tune 510BT Faceplate Replacement: passo 3, immagine 1 di 1

    • Carefully remove the faceplate by lifting it firmly.

    • Avoid rough movements, as there is a single thin wire connecting the faceplate to the internals.

    • If the repair is for the right-side driver, be mindful of the charging port, as the faceplate has a slot there for it. Lift the opposite end and back the port out.

    • To completely detach the faceplate, desolder the wires from the connections on the motherboard.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Ryan

Membro da: 01/30/24

513 Reputazione

4 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

Utah Tech University, Team 1-2, McMurrin Spring 2024 Membro di Utah Tech University, Team 1-2, McMurrin Spring 2024

UTAHTECH-MCMURRIN-S24S1G2

2 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 21

Tutti i Tempi: 58