Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

JBL Spyro Bottom Plate Replacement

Introduzione

This guide shows you how to remove the bottom plate, this provides access to the subwoofer itself.

Cosa ti serve

  1. JBL Spyro Bottom Plate Replacement, Locate the risers: passo 1, immagine 1 di 1

    • Locate the 3 risers the hold the base plate in place

    Traduci

  3. JBL Spyro Bottom Plate Replacement, Pry the plugs from the risers: passo 2, immagine 1 di 1

    • Insert a strong spudger or flathead near the riser and gently pry until the plug starts to come out. Work your way around to loosening each one.

    Traduci

  4. JBL Spyro Bottom Plate Replacement, Remove the base plate: passo 3, immagine 1 di 1

    • With all three loosened remove the base!

    • Note the not equilateral placement of the risers when replacing the base.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 17 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Ryan McLeod

Membro da: 05/22/10

606 Reputazione

2 Guide realizzate

Distintivi: 12

+9 altri distintivi

11 Commenti

Thanks, so nice tip. I'll see if I can find a similar speaker, big hug.

durval - Replica

No problem!!

Ryan McLeod -

My speaker is broken like on the image above and it sounds horrible. Do you know where to buy similar speaker in order to replice it?

pszopa - Replica

Does anybody know, if I can get a replacement speaker for the subwoofer of the JBL 2.1. system? Thanks!

Lars -

I was unable to find a replacement for the Atlas subwoofer it uses and ended up "recycling" the whole thing :( I've since replaced it with the the Klipsch ProMedia 2.1s and love them.

Ryan McLeod -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 19

Ultimi 30 Giorni: 73

Tutti i Tempi: 12,963