Aggiusta la tua roba Comunità Store

JBL Everest Elite 300 Headphone Jack Replacement

Introduzione

Headphones not connecting to the auxiliary? This may be caused by the headphone jack. Here's a guide to replace it. All you will need is a Phillips #00 screwdriver, a soldering iron, and an iFixit opening tool.

Cosa ti serve

  1. JBL Everest Elite 300 Headphone Jack Replacement, Speaker: passo 1, immagine 1 di 1

    • Remove the ear pad with an opening pick.

    Modifica

  2. JBL Everest Elite 300 Headphone Jack Replacement: passo 2, immagine 1 di 1

    • Reveal the speaker.

    Modifica

  4. JBL Everest Elite 300 Headphone Jack Replacement: passo 3, immagine 1 di 1

    • Remove the 4.5 mm screws using the Phillips #00 screwdriver.

    Modifica

  5. JBL Everest Elite 300 Headphone Jack Replacement: passo 4, immagine 1 di 1

    • Pull apart the bronze speaker away from the headphones carefully to reveal the wiring.

    • Desolder the motherboard speaker connection.

    Modifica

  6. JBL Everest Elite 300 Headphone Jack Replacement, Headphone Jack: passo 5, immagine 1 di 1

    • Unscrew the circuit board connected to the headphone jack.

    Modifica

  7. JBL Everest Elite 300 Headphone Jack Replacement: passo 6, immagine 1 di 1

    • Desolder the cables connecting the headphone jack board to the headphones.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 49