Aggiusta la tua roba Comunità Store

JBL Everest Elite 300 Charging Port Replacement

Introduzione

Headphones not powering on? It may be caused by the charging port malfunctioning, which may cause the headphones to not charge, making them unusable. Here's a guide to replace it! All you need is a Phillips #000 screwdriver, a soldering iron, and an iFixit opening tool.

Cosa ti serve

  1. JBL Everest Elite 300 Charging Port Replacement, Speaker: passo 1, immagine 1 di 1

    • Remove the ear pad with an opening pick.

    Modifica

  2. JBL Everest Elite 300 Charging Port Replacement: passo 2, immagine 1 di 1

    • Reveal the speaker.

    Modifica

  4. JBL Everest Elite 300 Charging Port Replacement: passo 3, immagine 1 di 1

    • Remove the 4.5 mm screws using the Phillips #00 screwdriver.

    Modifica

  5. JBL Everest Elite 300 Charging Port Replacement: passo 4, immagine 1 di 1

    • Pull apart the bronze speaker away from the headphones carefully to reveal the wiring.

    • Desolder the motherboard speaker connection.

    Modifica

  6. JBL Everest Elite 300 Charging Port Replacement, Charging port: passo 5, immagine 1 di 1

    • Remove the .5mm screw on the headphone jack circuit board that is covering the charging port.

    Modifica

  7. JBL Everest Elite 300 Charging Port Replacement: passo 6, immagine 1 di 1

    • Remove the .5mm screw from the charging port circuit board.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Gabe Clayton

Membro da: 09/13/23

85 Reputazione

1 Guida realizzata

Distintivi: 3

Team

University of North Texas, Team 1-2, Kilpatrick Fall 2023 Membro di University of North Texas, Team 1-2, Kilpatrick Fall 2023

UNT-KILPATRICK-F23S1G2

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 11

Tutti i Tempi: 69