Aggiusta la tua roba Comunità Store

JBL Charge 3 Passive Radiators Replacement

Introduzione

The passive radiators help the speaker improve its bass and are part of the cover that allows the speaker to be waterproof. Removing the passive radiator is one of the first steps in opening up the JBL Charge 3. You can uncover the insides of the speakers through the sides.

Cosa ti serve

  1. JBL Charge 3 Passive Radiators Replacement, Passive Radiators: passo 1, immagine 1 di 3 JBL Charge 3 Passive Radiators Replacement, Passive Radiators: passo 1, immagine 2 di 3 JBL Charge 3 Passive Radiators Replacement, Passive Radiators: passo 1, immagine 3 di 3

    • Remove the two 8mm Phillips #1 screws from the tabs.

    • NOTE: There may be only one screw.

    Traduci

  2. JBL Charge 3 Passive Radiators Replacement: passo 2, immagine 1 di 2 JBL Charge 3 Passive Radiators Replacement: passo 2, immagine 2 di 2

    • Insert the plastic opening tools underneath both tabs.

    Traduci

  4. JBL Charge 3 Passive Radiators Replacement: passo 3, immagine 1 di 1

    • Twist and pull open the passive radiator. The left radiator twists off counterclockwise; the right clockwise.

    Traduci

  5. JBL Charge 3 Passive Radiators Replacement: passo 4, immagine 1 di 2 JBL Charge 3 Passive Radiators Replacement: passo 4, immagine 2 di 2

    • Repeat all previous steps for the other passive radiator.

    • NOTE: only the right radiator needs to be removed for changing the battery.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Jack Ng

Membro da: 10/08/18

2.140 Reputazione

4 Guide realizzate

Distintivi: 14

+11 altri distintivi

Team

Cal Poly, Team S1-G6, Zimmerman Spring 2020 Membro di Cal Poly, Team S1-G6, Zimmerman Spring 2020

CPSU-ZIMMERMAN-S20S1G6

4 Membri

27 Guide realizzate

4 Commenti

i have a different model of the charge 3 it doesnt have screws but its hard to take out

Water Bass Tester (Water BT) - Replica

mine has screws and was also hard to pull with one hand

Carbon cookie -

Ich finde den Passivenstrahler nicht als Ersatzteil im Internet. Kann wer da helfen?

Sebastix01 _ - Replica

I have two of the same without screws, the process is precisely the same. Just need to do it a little bit harder

Francisco Sarmento - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 27

Ultimi 30 Giorni: 124

Tutti i Tempi: 14,071