Aggiusta la tua roba Comunità Store

Ivation IVWPDC20Y Motherboard Replacement

Introduzione

Use this guide when you need to replace the motherboard.

Cosa ti serve

  1. Ivation IVWPDC20Y Motherboard Replacement, Motherboard: passo 1, immagine 1 di 1

    • With the H2.0 bit screwdriver, remove the two screws on the yellow waterproof cover

    Modifica

  2. Ivation IVWPDC20Y Motherboard Replacement: passo 2, immagine 1 di 1

    • Apply a plastic opening tool to each of the corners and gently remove the casing

    • The front casing is held down by adhesive and may require additional work to remove

    • Apply just enough force to undo the inner latches to make sure not to damage the waterproof seal

    Modifica

  3. Ivation IVWPDC20Y Motherboard Replacement: passo 3, immagine 1 di 1

    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

    Modifica

  4. Ivation IVWPDC20Y Motherboard Replacement: passo 4, immagine 1 di 1

    • Remove the six screws from the edge of the clear inner casing with the PH00 screwdriver bit

    • These screws are very small and easy to strip so apply consistent pressure when removing them

    Modifica

  5. Ivation IVWPDC20Y Motherboard Replacement: passo 5, immagine 1 di 1

    • Pry off back outer casing using the black spudger or the blue prying tools

    Modifica

  6. Ivation IVWPDC20Y Motherboard Replacement: passo 6, immagine 1 di 1

    • Carefully remove the screen from the silver casing using a prying tool or the black spudger

    • There is adhesive in the center of the screen, be sure not to bend it when applying pressure

    Modifica

  7. Ivation IVWPDC20Y Motherboard Replacement: passo 7, immagine 1 di 1

    • Gently push out the pins holding the orange tape down using the pointy end of the spudger

    • Screen and orange tape should slip out as a whole

    Modifica

  9. Ivation IVWPDC20Y Motherboard Replacement: passo 8, immagine 1 di 1

    • Remove three screws holding the silver screen casing to the motherboard using the PH00 bit screwdriver

    Modifica

  10. Ivation IVWPDC20Y Motherboard Replacement: passo 9, immagine 1 di 1

    • Remove three screws holding the motherboard into the casing using the PH00 bit screwdriver bit

    Modifica

  11. Ivation IVWPDC20Y Motherboard Replacement: passo 10, immagine 1 di 1

    • Gently lift the corner of the motherboard out

    • Everything should come out as one component free of the casing

    Modifica

  12. Ivation IVWPDC20Y Motherboard Replacement: passo 11, immagine 1 di 1

    • Remove the soldering on the three wires holding the flash bulb

    • The wires are different colors: red, white, and black

    Modifica

  13. Ivation IVWPDC20Y Motherboard Replacement: passo 12, immagine 1 di 1

    • Remove the two screws holding the lens assembly to the motherboard using the PH00 bit screwdriver

    Modifica

  14. Ivation IVWPDC20Y Motherboard Replacement: passo 13, immagine 1 di 1

    • Remove the soldering on the 3 wires that are connected to the lens unit

    Modifica

  15. Ivation IVWPDC20Y Motherboard Replacement: passo 14, immagine 1 di 1

    • Remove the three screws holding the button sensors to the battery casing using the PH00 screwdriver bit

    Modifica

  16. Ivation IVWPDC20Y Motherboard Replacement: passo 15, immagine 1 di 1

    • Remove soldering on the grouping of wires connecting the button sensors

    Modifica

  17. Ivation IVWPDC20Y Motherboard Replacement: passo 16, immagine 1 di 1

    • Lift screen to reveal wires underneath

    • Remove soldering connecting screen to the motherboard

    Modifica

  18. Ivation IVWPDC20Y Motherboard Replacement: passo 17, immagine 1 di 1

    • Gently pull orange tape from the motherboard

    Modifica

  19. Ivation IVWPDC20Y Motherboard Replacement: passo 18, immagine 1 di 1

    • Remove soldering from the two green wires connected to the motherboard

    Modifica

  20. Ivation IVWPDC20Y Motherboard Replacement: passo 19, immagine 1 di 1

    • Gently bend the capacitor upwards

    • Remove soldering from the two connectors

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 2 altri collaboratori

Wendy Jones

Membro da: 02/06/16

225 Reputazione

2 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

USF Tampa, Team 6-6, Eyestone Spring 2016 Membro di USF Tampa, Team 6-6, Eyestone Spring 2016

USFT-EYESTONE-S16S6G6

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 416