Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the phone over to where the battery compartment resides.
-
Remove the battery compartment door by pushing down on the door with your thumbs and sliding the door off of the bottom of the device.
-
Remove battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to remove the screw in the middle of the battery compartment.
-
Pry open the case body with the plastic opening tool. Start at the bottom of the device and work toward the top. You will hear a "click" sound as the sides open.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully pull the wire connectors out of the white connector gauge to completely separate the front and back pieces.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Find the lever on the right side of the back half of the device.
-
Insert the tip of the lever into the square indent on the underside of the button.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.