Salta al contenuto principale

Insignia Sport NS-4V17 Front Case Cover Replacement

Cosa ti serve

  1. Insignia Sport NS-4V17 Front Case Cover Replacement, Battery: passo 1, immagine 1 di 1
    • Remove the 3mm Phillips #00 screw on the back of the Insignia NS-4v17.

  2. Insignia Sport NS-4V17 Front Case Cover Replacement: passo 2, immagine 1 di 2 Insignia Sport NS-4V17 Front Case Cover Replacement: passo 2, immagine 2 di 2
    • Detach the back cover by carefully pulling up and out on the back plastic casing.

    • Do not pull apart the red wire connecting the battery to the device.

  3. Insignia Sport NS-4V17 Front Case Cover Replacement: passo 3, immagine 1 di 1
    • Use the plastic opening tool to reach underneath the battery, opposite from the side with the red wire, and remove it from its plastic case.

    • Be careful to not tear the wires while opening the case.

  4. Insignia Sport NS-4V17 Front Case Cover Replacement: passo 4, immagine 1 di 1
    • Reach under the white plastic wire connector using the plastic opening tool and disconnect it from the socket.

    • Do not disconnect wires from plastic connector.

  5. Insignia Sport NS-4V17 Front Case Cover Replacement, Front Case Cover: passo 5, immagine 1 di 2 Insignia Sport NS-4V17 Front Case Cover Replacement, Front Case Cover: passo 5, immagine 2 di 2
    • Remove the four corner plastic covers on the back of the device using the plastic opening tool.

  6. Insignia Sport NS-4V17 Front Case Cover Replacement: passo 6, immagine 1 di 1
    • Using a Philips #00 screwdriver remove all four 4.5mm corner screws located underneath the corner pads.

  7. Insignia Sport NS-4V17 Front Case Cover Replacement: passo 7, immagine 1 di 3 Insignia Sport NS-4V17 Front Case Cover Replacement: passo 7, immagine 2 di 3 Insignia Sport NS-4V17 Front Case Cover Replacement: passo 7, immagine 3 di 3
    • Carefully wedge the plastic opening tool into either long side of the device.

    • Slowly move the plastic opening tool along the side of the device, separating the front and back case covers.

    • Repeat these steps on the other side of the device.

  8. Insignia Sport NS-4V17 Front Case Cover Replacement: passo 8, immagine 1 di 1
    • Once the front cover is loose, use your fingers to remove the front case cover for a new installation.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 12-36, Amido Spring 2013 Membro di Cal Poly, Team 12-36, Amido Spring 2013

CPSU-AMIDO-S13S12G36

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 347