Salta al contenuto principale

Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement

Cosa ti serve

  1. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement, Bluetooth Button: passo 1, immagine 1 di 1
    • Remove the rubber sleeve.

  2. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 2, immagine 1 di 2 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 2, immagine 2 di 2
    • Remove 4 screws from the green, plastic button cover.

  3. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 3, immagine 1 di 2 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 3, immagine 2 di 2
    • After successfully removing the plastic cover, use a sauter against the bluetooth button. The heat will make the removal of the button easy.

    • Place the new bluetooth button in the place of the old bluetooth button and mend the button into place using heat.

  4. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 5, immagine 1 di 3 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 5, immagine 2 di 3 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 5, immagine 3 di 3
    • Screw the 4 screws of the plastic button cover back onto the device.

  5. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 6, immagine 1 di 1
    • Put the plastic sleeve back onto the speaker.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Erin Steele

Membro da: 03/08/17

649 Reputazione

5 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 57