Aggiusta la tua roba Comunità Store

Insignia NS-DS9PDVD15 Disc Reader Replacement

Cosa ti serve

  1. Insignia NS-DS9PDVD15 Disc Reader Replacement, Bottom Cover: passo 1, immagine 1 di 2 Insignia NS-DS9PDVD15 Disc Reader Replacement, Bottom Cover: passo 1, immagine 2 di 2

    • Turn the power off. Slide the power button to OFF.

    Modifica

  2. Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 2, immagine 1 di 2 Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 2, immagine 2 di 2

    • Unplug AC adapter from car cigarette lighter.

    Modifica

  3. Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 3, immagine 1 di 1

    • Make sure there is no DVD or CD in the disc tray

    Modifica

  4. Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 4, immagine 1 di 2 Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 4, immagine 2 di 2

    • Unscrew the nine 9mm screws with a JIS #000 screwdriver.

    Modifica

  6. Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 5, immagine 1 di 3 Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 5, immagine 2 di 3 Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 5, immagine 3 di 3

    • Pry off back panel with prying tool, then remove by hand.

    Modifica

  7. Insignia NS-DS9PDVD15 Disc Reader Replacement, Disc Tray: passo 6, immagine 1 di 2 Insignia NS-DS9PDVD15 Disc Reader Replacement, Disc Tray: passo 6, immagine 2 di 2

    • After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.

    • Unscrew them with the JIS #000 screwdriver.

    Modifica

  8. Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 7, immagine 1 di 1

    • Slide the tray up and off of the hinge completely.

    Modifica

  9. Insignia NS-DS9PDVD15 Disc Reader Replacement, Disc Reader: passo 8, immagine 1 di 1

    • Locate the disk reader, it will be right under the disk chamber.

    Modifica

  10. Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 9, immagine 1 di 1

    • Pick it straight up, it should slide off the three pegs holding it in place, if not, wiggle each peg individually.

    Modifica

  11. Insignia NS-DS9PDVD15 Disc Reader Replacement: passo 10, immagine 1 di 1

    • Once you have it loose, unplug it from the PC Board. Then the disk reader can be removed.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 580