Aggiusta la tua roba Comunità Store

Insignia NS-CLOPP2 Screen Replacement

Introduzione

Outline what you are going to teach someone how to do.

Cosa ti serve

  1. Insignia NS-CLOPP2 Screen Replacement, Screen: passo 1, immagine 1 di 1

    • Turn the clock over and remove the 1cm screw with a Philips head screwdriver, which is located below the faceplate, on the bottom of the clock.

    Modifica

  2. Insignia NS-CLOPP2 Screen Replacement: passo 2, immagine 1 di 1

    • Begin to pry the front screen off gently with a Jimmy tool made by Ifixit.

    Modifica

  4. Insignia NS-CLOPP2 Screen Replacement: passo 3, immagine 1 di 1

    • Once you are able to create a space in between the device and the front screen, use your hands to continue to pry off the screen. Make sure that all the mini latches surrounding the perimeter have been unlatched, allowing the screen to come off easily.

    Modifica

  5. Insignia NS-CLOPP2 Screen Replacement: passo 4, immagine 1 di 1

    • Once you have undone the latches and pried off the first half of the screen, use your hand to pull off the rest of the screen.

    • To reassemble your device, follow these instructions in reverse order.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 6 altri collaboratori

Dilini De Silva

Membro da: 03/11/15

757 Reputazione

5 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Marist, Team 1-1, Laflen Spring 2015 Membro di Marist, Team 1-1, Laflen Spring 2015

MARS-LAFLEN-S15S1G1

2 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 6

Tutti i Tempi: 197