Aggiusta la tua roba Comunità Store

Insignia NS-CLOPP2 Antenna Replacement

Cosa ti serve

  1. Insignia NS-CLOPP2 Antenna Replacement, Antenna: passo 1, immagine 1 di 1

    • Follow steps on removing the motherboard as a prerequisite.

    • Gently move the motherboard back, revealing the thin black wire that is the antenna. The antenna wire is, on the outside, located on the lower, middle back. Follow the wire from the outside to the inside to make sure it's the correct one.

    Traduci

  2. Insignia NS-CLOPP2 Antenna Replacement: passo 2, immagine 1 di 1

    • Pull the wire up, making sure it's connected to the motherboard from the back side. To replace the wire, cut it completely from the motherboard.

    Traduci

  4. Insignia NS-CLOPP2 Antenna Replacement: passo 3, immagine 1 di 1

    • To re-attach the antenna cord to the motherboard, use a soldering tool to connect the wire to the same spot it was originally attached to.

    Traduci

  5. Insignia NS-CLOPP2 Antenna Replacement: passo 4, immagine 1 di 1

    • Make sure the wire is securely in place in the correct area of the clock, labeled "antenna" from the outside.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Dilini De Silva

Membro da: 03/11/15

757 Reputazione

5 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Marist, Team 1-1, Laflen Spring 2015 Membro di Marist, Team 1-1, Laflen Spring 2015

MARS-LAFLEN-S15S1G1

2 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 117