Aggiusta la tua roba Comunità Store

Insignia NS-15MS0832B Power Button Replacement

Introduzione

The power button is used to turn on and off the device. If the device will not turn on or off, the power button may be faulty. In order to resolve these issues, you will have to replace the power button. This guide will show you the steps to take to replacing the power button.

Cosa ti serve

  1. Insignia NS-15MS0832B Power Button Replacement, Power Button: passo 1, immagine 1 di 1

    • The power button is located on the top side on the tablet, along side the charging port and MicroUSB port

    Modifica

  2. Insignia NS-15MS0832B Power Button Replacement: passo 2, immagine 1 di 1

    • Starting in the corner, carefully insert the plastic opening tool.

    • Work the plastic opening tool carefully around the entire device to pry it open.

    Modifica

  4. Insignia NS-15MS0832B Power Button Replacement: passo 3, immagine 1 di 1

    • Once the tablet is completely open, set aside the back half.

    • Carefully place the other half of the tablet screen-side down.

    Modifica

  5. Insignia NS-15MS0832B Power Button Replacement: passo 4, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Using tweezers, gently grab the power button and pull it out from the tablet.

    Modifica

  6. Insignia NS-15MS0832B Power Button Replacement: passo 5, immagine 1 di 1

    • Once the faulty power button is removed, follow the directions in reverse order to reassemble the device.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Harrison Smith

Membro da: 10/19/16

329 Reputazione

3 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Texas Tech, Team 1-1, Bennett Fall 2016 Membro di Texas Tech, Team 1-1, Bennett Fall 2016

TTU-BENNETT-F16S1G1

4 Membri

6 Guide realizzate

2 Commenti

If the power button doesn’t physically click anymore, can you order a replacement? Is it even possible to solder on a new power button?

Thanks in advance…

Chris - Replica

Can you do this with the volume rocker? My Insignia tablet has a faulty rocker, and I need to fix it. (Note- the “+” part of the volume button sticks and jams the volume to 100 until I press “-”.)

Andy Joonseo Bae - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 10

Tutti i Tempi: 1,000