Salta al contenuto principale

Introduzione

How to replace the fuse on Insignia Ice Maker.

Parti

Nessuna parte specificata.

  1. Remove the 6 screws along the bottom of the rear casing. Remove the 6 screws along the bottom of the rear casing. Remove the 6 screws along the bottom of the rear casing.
    • Remove the 6 screws along the bottom of the rear casing.

  2. Kit per Apple Watch

    Screen and battery repairs just got easier.

    Acquista ora

    Kit per Apple Watch

    Screen and battery repairs just got easier.

    Acquista ora
  3. Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required. Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required.
    • Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required.

  4. Remove the fuse with a plastic pry tool. Remove the fuse with a plastic pry tool. Remove the fuse with a plastic pry tool.
    • Remove the fuse with a plastic pry tool.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Evan Taylor

Membro da: 18/01/2018

544 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S21-G3, Banghart Winter 2018 Membro di Cal Poly, Team S21-G3, Banghart Winter 2018

CPSU-BANGHART-W18S21G3

2 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 82