Introduzione

Circuit boards may require replacement after consistent use. This guide will show how to remove the circuit board.

Parti

Nessuna parte richiesta.

Use a Phillips head #2 screwdriver to remove the 6mm screw.
  • Use a Phillips head #2 screwdriver to remove the 6mm screw.

Aggiungi Commento

Twist the light grey plastic until the holes align with the blockers.
  • Twist the light grey plastic until the holes align with the blockers.

  • Remove the light grey plastic cover.

Aggiungi Commento

  • Remove the power cord from the slot it is inserted in.

Aggiungi Commento

  • Use a Phillips head #2 screwdriver to remove the 22mm screw connected to the black wire.

Aggiungi Commento

  • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the red wire.

Aggiungi Commento

  • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the blue wire.

Aggiungi Commento

  • Pinch the small white component connected to the circuit board.

  • Once pinched, wiggle this component until it is disconnected.

Aggiungi Commento

  • Pinch the red component connected to the circuit board.

  • Once pinched, wiggle this component until it is disconnected.

Aggiungi Commento

  • Wiggle the wide white component until it is removed from the circuit board.

Aggiungi Commento

  • Use a J1 head screwdriver to remove the 8mm screws from both sides of the circuit board.

Aggiungi Commento

  • Use a Phillips head #2 screwdriver to remove both 15mm screws from either side of the circuit board, indicated in the picture.

Aggiungi Commento

  • Position the pressure cooker so that the circuit board is farther from you then the black, red, and blue wire connections.

  • To the right of the board, use a Phillips head #2 screwdriver to remove the 6mm screw.

Aggiungi Commento

  • Use a Phillips head #2 screwdriver to remove the 6mm screw behind and to the right of the circuit board tray.

Aggiungi Commento

  • Remove and replace the circuit board.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Savannah Webb

Membro da: 18/01/2018

639 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S12-G3, Banghart Winter 2018 Membro di Cal Poly, Team S12-G3, Banghart Winter 2018

CPSU-BANGHART-W18S12G3

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 83