Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Rest the TV on its top edge so you have access to the base.
-
Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.
-
Remove the base from the frame.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lay the TV face down.
-
Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Stand the TV on its top edge.
-
Gently pry apart the front and back of the TV.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove all the pieces of tape to detach the wires from both sides.
-
You want to gently peel the tape off, without pulling on the wires.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Spread apart your TV the rest of the way, but do not disconnect any of the wires.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the tape that is holding the silver rectangular piece from the house.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the Phillips 00 Screwdriver, remove the screws that are also holding the silver rectangular piece to the house.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the plastic casing from the glass screen.
-
Then carefully remove metal backing from glass screen and separate the layer of plastic from the glass screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Separate plastic screen protector layers from both the backing and glass screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Find the display board and unplug the white ribbon cord from the board.
-
Squeeze both sides of the plug to release the cord.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using same screwdriver, unscrew the screws that are on the green display board.
-
Separate the green display board from its metal backing.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.