Salta al contenuto principale

Initiate the instrument cluster self-test

Cosa ti serve

  1. Initiate the instrument cluster self-test, Save the headlights from excessive use: passo 1, immagine 1 di 1
    • This procedure involves turning on and off the headlights repeatedly, which which can reduce the HID headlights' mean lifetime before failure. As a precursor, consider removing the 15A left & right low headlight fuses from the under-hood fuse box, positions 1 and 6. (Refer to your Owners Manual for instructions, or an iFixit guide.)

    • Be sure to reinstall the low beam headlight fuses before driving the vehicle.

  2. Initiate the instrument cluster self-test, Starting the self test inputs: passo 2, immagine 1 di 3 Initiate the instrument cluster self-test, Starting the self test inputs: passo 2, immagine 2 di 3 Initiate the instrument cluster self-test, Starting the self test inputs: passo 2, immagine 3 di 3
    • Insert the ignition key into the ignition lock. Leave it in the 0 or I position.

    • Push and hold the Sel/Reset knob (on the instrument panel by the fuel gauge), or the Sel/reset button on the right hand of the steering wheel below the Multi-Information Display Info button.

  3. Initiate the instrument cluster self-test: passo 3, immagine 1 di 1
    • Turn the headlights ON.

  4. Initiate the instrument cluster self-test: passo 4, immagine 1 di 2 Initiate the instrument cluster self-test: passo 4, immagine 2 di 2
    • Turn the ignition switch to ON (position II).

    • Some of the instrument lights will come on. If you aren't wearing your seatbelt, the seatbelt warning chime will sound.

  5. Initiate the instrument cluster self-test: passo 5, immagine 1 di 3 Initiate the instrument cluster self-test: passo 5, immagine 2 di 3 Initiate the instrument cluster self-test: passo 5, immagine 3 di 3
    • Within five seconds, and still holding in the Sel/Reset button, turn the headlights OFF, then ON, then OFF again.

  6. Initiate the instrument cluster self-test, Final inputs, and here comes the show: passo 6, immagine 1 di 3 Initiate the instrument cluster self-test, Final inputs, and here comes the show: passo 6, immagine 2 di 3 Initiate the instrument cluster self-test, Final inputs, and here comes the show: passo 6, immagine 3 di 3
    • Within 5 seconds, release the Sel/reset button.

    • Push and release the Sel/reset button button 3 times repeatedly.

    • The instrument cluster begins its self-test.

    • Each successive press of the Sel/reset button initiates a new cycling of all the gauges.

    • To end, turn the ignition switch to OFF, or vehicle speed exceeds 1.5 mph.

    • If you removed the 15A headlight fuses from the under-hood fuse box in step 1, reinstall them before driving.

Linea Traguardo

Altre 15 persone hanno completato questa guida.

David Spalding

Membro da: 11/12/15

6.461 Reputazione

12 Guide realizzate

3 Commenti

Folks, don’t post here asking about A COMPLETELY DIFFERENT VEHICLE. This page is for the 2004-2008 Acura TSX (Honda CL9), no others. Keep searching.

David Spalding - Replica

I left decklid open overnight and now my instrument panel is not working

Anthony - Replica

I have an 08 Acura TSX. The lights on the dash are flashing on and off. None of the guages work, neither does the heater. when I plug in my OBD, it throws a U0155 code, lost communication with the instrument panel cluster. The funny thing is, when I plug in the OBD, the instrument cluster work fine, as well as the heat. Please help!

John Dolan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 25

Ultimi 7 Giorni: 201

Ultimi 30 Giorni: 1,054

Tutti i Tempi: 309,348