Parti

Nessuna parte richiesta.

Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.
  • Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.

  • To ensure you don't lose any tiny parts during the replacement process, place parts on the white magnetic sheet.

  • Once the screws have been removed, proceed to take off back cover.

Aggiungi Commento

Now, proceed to lift the battery out and remove it.
  • Now, proceed to lift the battery out and remove it.

Aggiungi Commento

  • Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.

Aggiungi Commento

  • Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.

Aggiungi Commento

  • Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary.

  • Pull the motherboard out and down away from the top of the phone.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Lauren

Membro da: 13/02/2014

43 Reputazione

2 Guide realizzate

Team

Ohio State, Team 1-4, Buehl Spring 2014 Membro di Ohio State, Team 1-4, Buehl Spring 2014

OSU-BUEHL-S14S1G4

3 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 11

Tutti i Tempi: 394