Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Follow this guide to remove the foot valve. You can then replace either the entire valve, or individual internal components of the valve.
Cosa ti serve
-
-
Remove the hex head bolt from the top of the access door on the pump head.
-
-
-
Place the spacer collar around the pump rod below the raised chain, with the beveled side down, and the flat side facing up.
-
-
-
Remove the two bolts from the handle side of the pump head.
-
Use one wrench on the bolt and another on the nut beneath. Hold the bolt stationary and loosen the nut.
-
-
-
-
Slightly twist the head flange, until the corners overhang the top of the tank far enough to grab.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.