Salta al contenuto principale

India Mark III Access Door Replacement

Cosa ti serve

  1. India Mark III Access Door Replacement, Access Door: passo 1, immagine 1 di 2 India Mark III Access Door Replacement, Access Door: passo 1, immagine 2 di 2
    • Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

    • Remove the hex head bolt from the top of the access door on the pump head.

    • On reassembly, this bolt should be hand-tight.

  2. India Mark III Access Door Replacement: passo 2, immagine 1 di 3 India Mark III Access Door Replacement: passo 2, immagine 2 di 3 India Mark III Access Door Replacement: passo 2, immagine 3 di 3
    • Pull the access door straight up off the pump head.

    • Store the access door in a sanitary place to prevent contamination.

  3. India Mark III Access Door Replacement: passo 3, immagine 1 di 2 India Mark III Access Door Replacement: passo 3, immagine 2 di 2
    • The access door has a tongue that fits into the base of the pump head.

    • The access door makes a convenient tray to hold nuts and bolts during the disassembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

iFixit Membro di iFixit

Staff

136 Membri

16.573 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 214