Parti

Nessuna parte richiesta.

  1. Flip the device over so the bottom is facing up.
    • Flip the device over so the bottom is facing up.

    • You will know it is the bottom because there will be six silver screws visible.

    Aggiungi Commento

  2. Remove the USB converter device by gently pulling it out.
    • Remove the USB converter device by gently pulling it out.

    • Do not pull the converter device out by the cord.

    Aggiungi Commento

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Remove the six silver screws using a small Phillips head screwdriver.

    Aggiungi Commento

    • Slide the bottom plastic panel of the shell down so it is free of the end cap and the top panel.

    • Lift panel free of device.

    Aggiungi Commento

    • Remove the plastic end cap by sliding it forward, freeing from the rest of the device.

    • You can identify the end cap by noting the label "SuperDisk Drive" above where you would insert a floppy disk.

    Aggiungi Commento

    • Slide the metal housing out of the plastic shell.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Caitlin Horwatt

Membro da: 11/02/2014

137 Reputazione

2 Guide realizzate

Team

Ohio State, Team 1-2, Buehl Spring 2014 Membro di Ohio State, Team 1-2, Buehl Spring 2014

OSU-BUEHL-S14S1G2

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 464