Salta al contenuto principale

Imation Superdisk USB Drive Metal Casing Replacement

Cosa ti serve

  1. Imation Superdisk USB Drive Metal Casing Replacement, Plastic Housing: passo 1, immagine 1 di 2 Imation Superdisk USB Drive Metal Casing Replacement, Plastic Housing: passo 1, immagine 2 di 2
    • Flip the device over so the bottom is facing up.

    • You will know it is the bottom because there will be six silver screws visible.

  2. Imation Superdisk USB Drive Metal Casing Replacement: passo 2, immagine 1 di 2 Imation Superdisk USB Drive Metal Casing Replacement: passo 2, immagine 2 di 2
    • Remove the USB converter device by gently pulling it out.

    • Do not pull the converter device out by the cord.

  3. Imation Superdisk USB Drive Metal Casing Replacement: passo 3, immagine 1 di 2 Imation Superdisk USB Drive Metal Casing Replacement: passo 3, immagine 2 di 2
    • Remove the six silver screws using a small Phillips head screwdriver.

  4. Imation Superdisk USB Drive Metal Casing Replacement: passo 4, immagine 1 di 2 Imation Superdisk USB Drive Metal Casing Replacement: passo 4, immagine 2 di 2
    • Slide the bottom plastic panel of the shell down so it is free of the end cap and the top panel.

    • Lift panel free of device.

  5. Imation Superdisk USB Drive Metal Casing Replacement: passo 5, immagine 1 di 2 Imation Superdisk USB Drive Metal Casing Replacement: passo 5, immagine 2 di 2
    • Remove the plastic end cap by sliding it forward, freeing from the rest of the device.

    • You can identify the end cap by noting the label "SuperDisk Drive" above where you would insert a floppy disk.

  6. Imation Superdisk USB Drive Metal Casing Replacement: passo 6, immagine 1 di 2 Imation Superdisk USB Drive Metal Casing Replacement: passo 6, immagine 2 di 2
    • Slide the metal housing out of the plastic shell.

  7. Imation Superdisk USB Drive Metal Casing Replacement, Metal Casing: passo 7, immagine 1 di 2 Imation Superdisk USB Drive Metal Casing Replacement, Metal Casing: passo 7, immagine 2 di 2
    • Slide metal panel out of the metal casing.

  8. Imation Superdisk USB Drive Metal Casing Replacement: passo 8, immagine 1 di 2 Imation Superdisk USB Drive Metal Casing Replacement: passo 8, immagine 2 di 2
    • Slide disk drive out of metal casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ryan

Membro da: 02/13/14

1 Reputazione

1 Guida realizzata

Team

Ohio State, Team 1-2, Buehl Spring 2014 Membro di Ohio State, Team 1-2, Buehl Spring 2014

OSU-BUEHL-S14S1G2

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 350