Introduzione

Use this guide to replace the Wi-Fi Card of the IBM Thinkpad R40.

Parti

Nessuna parte richiesta.

  1. Use a screwdriver to remove the screws located at the bottom of the laptop, covering the battery pack.
    • Use a screwdriver to remove the screws located at the bottom of the laptop, covering the battery pack.

  2. Remove the battery from the laptop and place it to the side.
    • Remove the battery from the laptop and place it to the side.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Loosen the screw covering the Wi-Fi card panel.
    • Loosen the screw covering the Wi-Fi card panel.

  5. Open the now loosened section. Release the clips that hold the Wi-Fi card in place.
    • Open the now loosened section.

    • Release the clips that hold the Wi-Fi card in place.

    • Remove the Wi-Fi card.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Erin

Membro da: 08/09/2011

231 Reputazione

2 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 32

Tutti i Tempi: 3,474