Salta al contenuto principale

Introduzione

The Mini-PCI port can be accessed easily after removing the rear cover

Parti

Nessuna parte specificata.

  1. Unscrew the 20 Phillips screws on the underside of the T42.
    • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

  2. Unscrew the 2 Phillips screws on both sides of the T42's rear.
    • Unscrew the 2 Phillips screws on both sides of the T42's rear.

  3. Flip the laptop over and open the screen.
    • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

  4. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  5. Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together. Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.
    • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

  6. Remove the screw affixing the bracket down.
    • Remove the screw affixing the bracket down.

  7. Lift the bracket up and out.
    • Lift the bracket up and out.

  8. Carefully disconnect it from the motherboard and pull it out of the device.
    • Carefully disconnect it from the motherboard and pull it out of the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 29-76, Johann Spring 2010 Membro di Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Membri

30 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 4,049