Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

IBM ThinkPad T42 Hard Drive Replacement

Cosa ti serve

  1. IBM ThinkPad T42 Hard Drive Replacement, Battery Clips: passo 1, immagine 1 di 1
    • Flip the laptop over so the underside is facing you, then, release the 2 clips holding the battery on.

    • Make sure the laptop is off when you do this, sudden power outages can cause data corruption.

  2. IBM ThinkPad T42 Hard Drive Replacement, Removing the Battery: passo 2, immagine 1 di 1
    • Carefully grab the battery, then pull it straight out, not at an angle.

  3. IBM ThinkPad T42 Hard Drive Replacement, Hard Drive Screw: passo 3, immagine 1 di 1
    • Unscrew the single screw holding the drive cage in place.

  4. IBM ThinkPad T42 Hard Drive Replacement, Sliding Drive Out: passo 4, immagine 1 di 1
    • Pull the hard drive out with of its bay the help of pictured ridges. Carefully remove it.

    • It might help to open the display slightly.

  5. IBM ThinkPad T42 Hard Drive Replacement, Removal of HDD: passo 5, immagine 1 di 1
    • Pull the Hard Drive out and proceed with replacement.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Austin Kidd

Membro da: 04/21/10

317 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 29-76, Johann Spring 2010 Membro di Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Membri

35 Guide realizzate

Un commento

Excelente guía. Gracias

Luis Aguilar - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 82

Tutti i Tempi: 20,620