Salta al contenuto principale
  1. Remove the 6mm screw Pull out the hard drive The hard drive might be a little tough to pull out
    • Remove the 6mm screw

    • Pull out the hard drive

    • The hard drive might be a little tough to pull out

  2. The sticker is to keep the warranty on the laptop so once removed the warranty is void Peel the sticker and remove the 15mm screw Remove all 6 of the 16mm screws
    • The sticker is to keep the warranty on the laptop so once removed the warranty is void

    • Peel the sticker and remove the 15mm screw

    • Remove all 6 of the 16mm screws

  3. use a  prying tool and insert it on the cracks on the sides of the keyboard and lift gently until you here a click repeat this step on all sides of the keyboard until the keyboard is completely detached from the laptop
    • use a prying tool and insert it on the cracks on the sides of the keyboard and lift gently until you here a click

    • repeat this step on all sides of the keyboard until the keyboard is completely detached from the laptop

  4. Lift the keyboard and remove the keyboard ribbon cable  from the laptop Lift the keyboard and remove the keyboard ribbon cable  from the laptop Lift the keyboard and remove the keyboard ribbon cable  from the laptop
    • Lift the keyboard and remove the keyboard ribbon cable from the laptop

  5. Remove the one 21mm screw Remove the 6mm screw
    • Remove the one 21mm screw

    • Remove the 6mm screw

  6. Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora

    Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora
  7. Take the tool and run it under the black case. Take the tool and run it under the black case.
    • Take the tool and run it under the black case.

  8. Unscrew the 2 (17mm) screws Unscrew the 6mm screw Unscrew the 6mm screw
    • Unscrew the 2 (17mm) screws

    • Unscrew the 6mm screw

  9. Gently disconnect the white display ribbon cable Pulling on the ribbon cable too hard could result in worse or faulty connection.
    • Gently disconnect the white display ribbon cable

    • Pulling on the ribbon cable too hard could result in worse or faulty connection.

  10. Unscrew 4 (6mm) screws Lift screen straight up If not lifted straight up the screen could get damaged
    • Unscrew 4 (6mm) screws

    • Lift screen straight up

    • If not lifted straight up the screen could get damaged

  11. Flip the ThinkPad over so that it is upside down. Push latch switch to the left.
    • Flip the ThinkPad over so that it is upside down.

    • Push latch switch to the left.

    • Gently lift the battery out and away from the ThinkPad

    • You have to hold the latch to the left while you remove the battery. Simply pushing once will not unlock the battery

  12. Remove the 6mm screw LIft the bracket out LIft the bracket out
    • Remove the 6mm screw

    • LIft the bracket out

  13. Remove one 6mm screw Remove 3 18mm screws Take off the bracket on the CPU fan
    • Remove one 6mm screw

    • Remove 3 18mm screws

    • Take off the bracket on the CPU fan

  14. Lift the CPU fan Pull out the cable attached to the motherboard Pull out the cable attached to the motherboard
    • Lift the CPU fan

    • Pull out the cable attached to the motherboard

  15. Turn the locking screw to unlock with the flat head screwdriver LIft the CPU out
    • Turn the locking screw to unlock with the flat head screwdriver

    • LIft the CPU out

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Thomas Stone

Membro da: 19/03/2018

235 Reputazione

2 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 11

Tutti i Tempi: 159