Salta al contenuto principale

IBM ThinkPad 600E Keyboard Replacement

Cosa ti serve

  1. IBM ThinkPad 600E Keyboard Replacement, Battery: passo 1, immagine 1 di 3 IBM ThinkPad 600E Keyboard Replacement, Battery: passo 1, immagine 2 di 3 IBM ThinkPad 600E Keyboard Replacement, Battery: passo 1, immagine 3 di 3
    • Flip the laptop over and find the battery latch.

  2. IBM ThinkPad 600E Keyboard Replacement: passo 2, immagine 1 di 1
    • Move the latch to the side with the unlocked symbol.

  3. IBM ThinkPad 600E Keyboard Replacement: passo 3, immagine 1 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 3, immagine 2 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 3, immagine 3 di 3
    • Pry the battery out using your fingers.

  4. IBM ThinkPad 600E Keyboard Replacement, Keyboard: passo 4, immagine 1 di 3 IBM ThinkPad 600E Keyboard Replacement, Keyboard: passo 4, immagine 2 di 3 IBM ThinkPad 600E Keyboard Replacement, Keyboard: passo 4, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Anti-Static Wrist Strap
    $7.95
    Compra
    • Use an antistatic wrist strap to avoid the risk of electric shock.

    • Unscrew the coin screw for the hard drive using a coin. Pry off the HDD cover.

    • It is easier to remove the coin screw using a thicker coin, such as a nickel.

  5. IBM ThinkPad 600E Keyboard Replacement: passo 5, immagine 1 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 5, immagine 2 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 5, immagine 3 di 3
    • Unlock the highlighted latch and pull the disk drive out.

    • Remove the disk drive.

  6. IBM ThinkPad 600E Keyboard Replacement: passo 6, immagine 1 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 6, immagine 2 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 6, immagine 3 di 3
    • Most of the screws have a small, plastic covering attached with an adhesive. Use the metal spudger to pry it off. Make sure to note which screw came from which hole.

    • Four 18mm long M2.5 screws

    • Two 16mm long M2.5 screws

    • One 4.5mm long M2.5 screws

    • Four 3mm long M2.5 screws

  7. IBM ThinkPad 600E Keyboard Replacement: passo 7, immagine 1 di 2 IBM ThinkPad 600E Keyboard Replacement: passo 7, immagine 2 di 2
    • Open the laptop all the way until it is flat.

    • Take the black circle off and remove the screw.

    • One 4.5mm long M2.5 screw

  8. IBM ThinkPad 600E Keyboard Replacement: passo 8, immagine 1 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 8, immagine 2 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 8, immagine 3 di 3
    • Pry the keyboard case up from the bottom and gently pry it up from all other edges.

    • Use caution when opening the case, as there are two ribbon cables attached to the keyboard case.

  9. IBM ThinkPad 600E Keyboard Replacement: passo 9, immagine 1 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 9, immagine 2 di 3 IBM ThinkPad 600E Keyboard Replacement: passo 9, immagine 3 di 3
    • Pry the connectors of the ribbon cables off slowly, lifting straight up. Wiggle gently side to side if necessary.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Team

USF Tampa, Team 1-4, Nance Fall 2016 Membro di USF Tampa, Team 1-4, Nance Fall 2016

USFT-NANCE-F16S1G4

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,802