Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will show you how to replace your hard drive disk. Several reasons why you would want to replace your hard drive is because you want to increase your memory or it is faulty or broken.

  1. Flip the laptop over and find the battery latch. Flip the laptop over and find the battery latch. Flip the laptop over and find the battery latch.
    • Flip the laptop over and find the battery latch.

  2. Move the latch to the side with the unlocked symbol.
    • Move the latch to the side with the unlocked symbol.

  3. Pry the battery out using your fingers. Pry the battery out using your fingers. Pry the battery out using your fingers.
    • Pry the battery out using your fingers.

  4. Put on the anti-static wrist trap and clip it to a large metal object.
    • Put on the anti-static wrist trap and clip it to a large metal object.

    • If you do not have an anti-static wristband, make sure to touch a large metal object to ground yourself before beginning to work on your replacement. Occasionally touch the metal object.

  5. Using a coin, remove the coin screw by turning counterclockwise. It's best to use a thicker coin, such as a nickel. It's best to use a thicker coin, such as a nickel.
    • Using a coin, remove the coin screw by turning counterclockwise.

    • It's best to use a thicker coin, such as a nickel.

  6. Using a plastic spudger, pry off the plastic cover by pulling it out.
    • Using a plastic spudger, pry off the plastic cover by pulling it out.

  7. Utilizing your fingers, untuck the tab and pull to remove the hard drive. Utilizing your fingers, untuck the tab and pull to remove the hard drive. Utilizing your fingers, untuck the tab and pull to remove the hard drive.
    • Utilizing your fingers, untuck the tab and pull to remove the hard drive.

  8. Using a screwdriver, remove the screws by turning them counterclockwise to remove the bracket. four 3mm PH0 screws The metal bracket is still attached with a weak adhesive tape, gently pry it off with a spudger.
    • Using a screwdriver, remove the screws by turning them counterclockwise to remove the bracket.

    • four 3mm PH0 screws

    • The metal bracket is still attached with a weak adhesive tape, gently pry it off with a spudger.

  9. The top plastic piece is adhered with a weak adhesive. Gently pry it off with a spudger. The top plastic piece is adhered with a weak adhesive. Gently pry it off with a spudger.
    • The top plastic piece is adhered with a weak adhesive. Gently pry it off with a spudger.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Kevin Nguyen

Membro da: 04/10/2016

626 Reputazione

4 Guide realizzate

Team

USF Tampa, Team 1-4, Nance Fall 2016 Membro di USF Tampa, Team 1-4, Nance Fall 2016

USFT-NANCE-F16S1G4

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 38

Tutti i Tempi: 1,749