Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 2 : passo 1, immagine 2 di 2
    • Take off the back covering of the phone along with the battery and SIM card.

    • The SIM card is located above the battery.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 2 : passo 2, immagine 2 di 2
    • Using the Phillips #00 Screwdriver, take out the four small screws located at the four corners of the phone.

    • Save the screws. They will be needed for reassembly.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Using the same screwdriver, take out the two bigger screws located on each side of the battery compartment.

    • NOTE: Save the screws. They will be needed for reassembly.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 1
    • Once all the screws are removed, use the iPod opening tool to pry off the back covering of the phone along the edge of the back cover and you will have access to the motherboard.

    • Note: The power and volume buttons will fall out of the phone. Set aside for reassembly.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 5, immagine 1 di 1
    • Carefully pull the backing of the phone from the motherboard with your hands.

Linea Traguardo

Altre 2 persone hanno completato questa guida.

Savanah Anik

Membro da: 02/13/14

65 Reputazione

1 Guida realizzata

Team

Ohio State, Team 1-1, Meza Spring 2014 Membro di Ohio State, Team 1-1, Meza Spring 2014

OSU-MEZA-S14S1G1

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 457