Salta al contenuto principale

Huawei P9 Plus Rear Case Replacement

Cosa ti serve

  1. Huawei P9 Plus Rear Case Replacement, Rear Case: passo 1, immagine 1 di 2 Huawei P9 Plus Rear Case Replacement, Rear Case: passo 1, immagine 2 di 2
    • First switch off your phone.

    • Remove the SD and SIM card tray.

  2. Huawei P9 Plus Rear Case Replacement: passo 2, immagine 1 di 1
    • Remove the two P2 Pentalobe screws on either side of the USB C port.

  3. Huawei P9 Plus Rear Case Replacement: passo 3, immagine 1 di 2 Huawei P9 Plus Rear Case Replacement: passo 3, immagine 2 di 2
    • Use an iSclack or a suction handle to separate the display unit from the rear case.

    • Do not fully separate the pieces as they are still connected by the fingerprint sensor cable.

  4. Huawei P9 Plus Rear Case Replacement: passo 4, immagine 1 di 3 Huawei P9 Plus Rear Case Replacement: passo 4, immagine 2 di 3 Huawei P9 Plus Rear Case Replacement: passo 4, immagine 3 di 3
    • After separating the rear case flip the other half open to get to the flex connectors.

    • With a spudger unplug the flex connector of the fingerprint sensor and the one of the side buttons.

    • Remove the rear case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

iFixit Membro di iFixit

Staff

136 Membri

16.573 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 9

Tutti i Tempi: 1,990