Salta al contenuto principale

Huawei P9 Charging Board Replacement

Cosa ti serve

  1. Huawei P9 Charging Board Replacement, Back Cover: passo 1, immagine 1 di 3 Huawei P9 Charging Board Replacement, Back Cover: passo 1, immagine 2 di 3 Huawei P9 Charging Board Replacement, Back Cover: passo 1, immagine 3 di 3
    • First switch off your phone and remove the SIM card tray.

    • Unscrew the two Pentalobe P2 screws located at the bottom next to the device's USB C port.

    • If the screen is cracked you might want to use some tape to protect your eyes from glass shreds and get a better grip to open the phone.

  2. Huawei P9 Charging Board Replacement: passo 2, immagine 1 di 2 Huawei P9 Charging Board Replacement: passo 2, immagine 2 di 2
    • Avoid to lift only the display instead of the whole phone assembly as doing so may cause damage to the screen.

    • Use an iSclack or a suction handle to separate the phone assembly from the rear panel.

    • In case you can‘t manage to lift the phone assembly out of the rear panel you can insert the pointed end of a spudger in the headphone jack opening and press the phone assembly upwards until you create a gap between assembly and rear panel. Then use the spudger to lever the phone assembly out of the panel.

    • Don't remove the rear panel completely yet. There is a cable connected to it! It is running from the finger print sensor to the display unit.

  3. Huawei P9 Charging Board Replacement, Fingerprint sensor: passo 3, immagine 1 di 2 Huawei P9 Charging Board Replacement, Fingerprint sensor: passo 3, immagine 2 di 2
    • Disconnect the fingerprint sensor using a spudger.

  4. Huawei P9 Charging Board Replacement, lower section: passo 4, immagine 1 di 3 Huawei P9 Charging Board Replacement, lower section: passo 4, immagine 2 di 3 Huawei P9 Charging Board Replacement, lower section: passo 4, immagine 3 di 3
    • Undo the three Phillips #00 screws.

    • Disconnect the loudspeaker flex connector.

    • Carefully remove the metal bracket.

    • Mind the adhesive underneath that might stick to the headphone connector.

  5. Huawei P9 Charging Board Replacement: passo 5, immagine 1 di 3 Huawei P9 Charging Board Replacement: passo 5, immagine 2 di 3 Huawei P9 Charging Board Replacement: passo 5, immagine 3 di 3
    • Disconnect the motherboard flex cable and the antenna cable.

    • Unplug the headphone jack connector.

  6. Huawei P9 Charging Board Replacement, Charging Board: passo 6, immagine 1 di 1
    • Now you can easily remove the charging board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Team

iFixit Membro di iFixit

Staff

136 Membri

16.578 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 26

Tutti i Tempi: 7,116