Huawei P8 Lite Loud Speaker Replacement - Guida di riparazione iFixit

Introduzione

Use this guide to replace the loudspeaker on your Huawei P8 Lite.

Cosa ti serve

Passo 1 Back Cover

Huawei P8 Lite Loud Speaker Replacement, Back Cover: passo 1, immagine 1 di 2

Huawei P8 Lite Loud Speaker Replacement, Back Cover: passo 1, immagine 2 di 2

Use an Opening Tool and start to lever up the back cover of your Huawei P8 Lite at the bottom of your phone.

Passo 2

Huawei P8 Lite Loud Speaker Replacement: passo 2, immagine 1 di 3

Huawei P8 Lite Loud Speaker Replacement: passo 2, immagine 2 di 3

Huawei P8 Lite Loud Speaker Replacement: passo 2, immagine 3 di 3

There are clips around the whole mid frame, holding down the back cover. Open all of them with the Opening Tool.
When all clips are open, remove the back cover from the rest of the phone.
If the back cover doesn't come freely, there are probably some additional clips that need to be disconnected.

Passo 3 Loudspeaker

Huawei P8 Lite Loud Speaker Replacement, Loudspeaker: passo 3, immagine 1 di 1

Use a tweezer to remove the warranty sticker which sits on a screw in the bottom right of your phone.

Passo 4

Huawei P8 Lite Loud Speaker Replacement: passo 4, immagine 1 di 1

Remove the 4 black Torx T5 screws which hold down the lower part of the loudspeaker.
Remove the three silver Phillips #00 screws which hold down the upper part of the loudspeaker.

Passo 5

Huawei P8 Lite Loud Speaker Replacement: passo 5, immagine 1 di 1

Remove the loudspeaker carefully.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 2 altri collaboratori

Dominik Schnabelrauch

Membro da: 11/23/16

203.353 Reputazione

682 Guide realizzate

+37 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

16.817 Guide realizzate

0 Commenti

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 2,768